Classic in its simplicity, the 2-piece 24" Kaden Counter Stool set will fit with any décor. Pull the stools up to the kitchen counter or use for extra seating in the dining area or family room. The rush seat is made of natural sea grass and the stool frame is constructed of sturdy Solid Wood. The broad square seat is 13.9"W x 13.9"D, and footrests at two different heights provide added comfort. Finished in a warm Walnut.
Overall stool height 29"
Seat dimension 15.5"W x 15.5"D
Weight capacity up to 220 lbs.
Comes ready to asemble
Ships in 1 box Classic woven rush seats Solid Wood construction Seat height is 24.02"
Quantity Available in Stock
Assembled Dimensions (L x W x H)
13.92" x 13.92" x 24.02"
Solid wood / Natural sea grass
Country of Origin
2 business days
Shipping Dimensions (L x W x H)
29.5" x 15.3" x 8.1"
Ships from ZIP Code
When you make a purchase from our website, you are covered by our 30 days return policy.
For a full review of our returns policy, please read our return policy.
Based on 5 reviews
Thanks for your review! it will be published soon. Thank you! your review was submitted
Great for the price!
It's hard to assemble. It is not only to get big screws in the round foot rests. The allen wrench is easy stripped.The good thing is that I have a few allen wrenches. Also a few holes are redrilling, kind like a figure 8.To make screw in the round foot rest easier, I applied screws with two allen wrenches simultaneously. So I don't have to hold the round foot rests while tying the screws.
They look great if you can get them together.The predrilled screw holes are way too small. After twisting on my screwdriver for a long, hurtful time, I got out the old electric drill (Here we go again!) and drilled much bigger holes for the large screws. Then it worked. You can't assemble these unless you have an electric drill and have lots of patience, or have the hand-strength of Arnold Schwarzennegger.
They look fine, and the seat us nice and earthy, but assembly was difficult for two reasons:1. The round lower cross bars fit into round holes in the legs. In order to drive the big screws through the legs and into those round cross bars, you'll need some way to prevent the bars from rotating in those holes, preferably without marring the finish on the bars. I used one hand to hold it, but that means you are holding a 1 inch diameter, smooth, round bar as you're applying the driving torque using a wrench with a 4 inch lever arm. Long story short, you'll need to grab that bar really tightly if you want those screws to go in all the way.2. The 4mm allen wrench supplied by the manufacturer isn't made with hardened steel--at least not as hardened as the steel the screws are made from. The one I had in the hardware kit was stripped round by the second screw! Luckily I had my own metric allen wrench set!
I purchased four of these stools and three of them turned out beautifully. Very easy to put together and look very nice. The last stool I assembled not go together correctly. I had already put together 3 of them and thrown away the packaging. I reached out to the company about that last stool and they said they needed of course all the info that was on the package I’d already thrown away.So, they seem good but don’t throw away anything until you see that everything is good.